|
|
Post by jasonandsarah on May 21, 2015 9:45:13 GMT -5
Setting up a 30g breeder frag tank and thinking about drilling it for a sump? At this point if I don't drill it I probably won't even have a sump.
Sent from my SM-N910R4 using proboards
|
|
|
|
Post by chevy50sd on May 21, 2015 17:43:04 GMT -5
You can buy them reasonably on Amazon.com That's where I have gotten all of mine they average 5-7 dollars and work good just drill slow and keep plenty of water on them.
I usually use a piece of foam board cut a hole in it tape it down good where I want my hole fill the template with water and start drilling. I have drilled several tanks and haven't had a problem yet just let the drill cut its way through and don't apply any pressure let the weight of the drill do the work.
|
|
|
|
Post by reefkprz on May 21, 2015 18:19:56 GMT -5
I have a 2 1/2 and a 3 inch
|
|
|
|
Post by jasonandsarah on May 21, 2015 18:33:45 GMT -5
I have a 2 1/2 and a 3 inch Little big for a 30g breeder lol but ty:-) Sent from my SM-N910R4 using proboards |
|
|
|
Post by moulton712 on May 22, 2015 10:20:17 GMT -5
I have a brand new 40b drilled with 2 3/4in drains with overflow box and bulkheads. Shoot me an offer. Or I can drill your tank for you. Text me.
|
|
skirossi
Full Member
Brunswick
Posts: 117
|
Post by skirossi on May 22, 2015 11:17:05 GMT -5
I've got a couple of different bits also, no idea on size right now as I'm at work ( I think they were for 3/4" and 1" bulk heads). They both were used on 40 breeders so they aren't too big.
I also have a brand new drilled 40b for sale if interested.
|
|
|
|
Post by jasonandsarah on May 22, 2015 12:07:58 GMT -5
I've got a couple of different bits also, no idea on size right now as I'm at work ( I think they were for 3/4" and 1" bulk heads). They both were used on 40 breeders so they aren't too big. I also have a brand new drilled 40b for sale if interested. Are you selling the bits? Or loaning them out? I think I'm going to stick with the 30 breeder for now. I like that it's not very deep, shallow tanks are best for frag tanks imo... plus I already paid for it  Sent from my SM-N910R4 using proboards |
|
|
|
Post by scoobnoob on May 22, 2015 23:51:39 GMT -5
Got a 3/4 and a 1.5" you can borrow. Also templates for each
|
|
skirossi
Full Member
Brunswick
Posts: 117
|
Post by skirossi on May 23, 2015 8:02:15 GMT -5
I'd prefer to loan them. I'm in Brunswick, but work in Winthrop so could meet in either area.
Bits are 1 3/8" and 2 7/16" (a little under 2 1/2) I have a template for the larger one.
Yeah already paid for is a good thing!
|
|
