|
|
Post by Sean (90 reef, fw rack sys) on Apr 27, 2015 15:40:59 GMT -5
Anyone have a solution to the gurgling of the overflow?
|
|
|
|
Post by jasonandsarah on Apr 27, 2015 18:25:57 GMT -5
Anyone have a solution to the gurgling of the overflow? What kind of overflow? If it's a hang on, do you have a Hoffer gurgle buster? Sent from my SM-N910R4 using proboards |
|
|
|
Post by Sean (90 reef, fw rack sys) on Apr 28, 2015 7:28:50 GMT -5
Thanks again Jason.Doing some work on plumbing tomorrow, so I'll grab those pieces too.
|
|
|
|
Post by jasonandsarah on Apr 28, 2015 7:57:08 GMT -5
Thanks again Jason.Doing some work on plumbing tomorrow, so I'll grab those pieces too. So you figured it out? Gonna build a Hoffer? Wish I knew before the swap as I have a few laying around;D Sent from my SM-N910R4 using proboards |
|
|
|
Post by Sean (90 reef, fw rack sys) on Apr 28, 2015 15:08:08 GMT -5
Ya, just picked up the pieces. Got quite a bit to do with the tank tomorrow.
|
|
|
|
Post by Sean (90 reef, fw rack sys) on Apr 29, 2015 9:27:59 GMT -5
How tight should it be between the pipe and the coupler?
|
|
|
|
Post by jasonandsarah on Apr 29, 2015 10:33:24 GMT -5
How tight should it be between the pipe and the coupler? That depends on your flow. You should be able to slide it up and down to adjust it for maximum quietness. Sent from my SM-N910R4 using proboards |
|
|
|
Post by jasonandsarah on Apr 29, 2015 11:04:13 GMT -5
That make sence?
Sent from my SM-N910R4 using proboards
|
|
|
|
Post by Sean (90 reef, fw rack sys) on Apr 29, 2015 18:52:21 GMT -5
So I built them acoordong to the site and I still get the toilet flush. What did I do wrong?
|
|
|
|
Post by gotareef on Apr 29, 2015 21:47:26 GMT -5
You should be able to move the airline up and down in the pipe to fine tune where the air bible pops in the pipe the air bubble is why you get the flushing sound
|
|
|
|
Post by jasonandsarah on Apr 30, 2015 4:59:54 GMT -5
You should be able to move the airline up and down in the pipe to fine tune where the air bible pops in the pipe the air bubble is why you get the flushing sound Ditto.. do you have airline tubing in the top? What Web site did you build it from? home.everestkc.net/jrobertson57268/HGB/HGB_construction.htmlSent from my SM-N910R4 using proboards |
|
|
|
Post by Sean (90 reef, fw rack sys) on Apr 30, 2015 9:55:57 GMT -5
Ya that's the site I used. How long should the airline be? It doesn't say that. How far down should it go?
|
|
|
|
Post by jasonandsarah on Apr 30, 2015 10:14:28 GMT -5
Ya that's the site I used. How long should the airline be? It doesn't say that. How far down should it go? I believe it's supposed to go past the holes. I'm not positive why but I run mine upside down from that design. So the water has to go under the coupler vs over it... I think Ryan taught me that? But I'm not positive so don't hold me to it! Lol mine are silent now though. Sent from my SM-N910R4 using proboards |
|
|
|
Post by Sean (90 reef, fw rack sys) on Apr 30, 2015 14:37:27 GMT -5
Gonna try putting a longer air line first. First attempt with it over flowed the tank
|
|
|
|
Post by jasonandsarah on Apr 30, 2015 14:53:59 GMT -5
Gonna try putting a longer air line first. First attempt with it over flowed the tank Do you have big enough holes? Could you post a picture? Sent from my SM-N910R4 using proboards |
|
