|
|
Post by gotareef on Jan 28, 2015 10:48:55 GMT -5
the screen quit on my i4 need it fixed today if possible anyone know where fixes them (close to lisbon)
|
|
|
|
Post by jasonandsarah on Jan 28, 2015 11:25:52 GMT -5
the screen quit on my i4 need it fixed today if possible anyone know where fixes them (close to lisbon) Call and ask game box in Topsham. I think they do. Sent from my SM-N910R4 using proboards |
|
|
|
Post by gotareef on Jan 28, 2015 11:38:46 GMT -5
web says they open at 10 but they havnt answered.... I just ordered a screen should be here tomorrow.... looks like I might learn how to do it  |
|
|
|
Post by Pokahpolice on Jan 28, 2015 11:50:55 GMT -5
I've done a new screen and its not an easy task. When I was finished the phone never worked right again. You basically have to take the entire phone apart...it sucks.
|
|
|
|
Post by jasonandsarah on Jan 28, 2015 12:37:58 GMT -5
I'm in the middle of doing my daughter's nabi! Pita for sure... Had Gamebox do my oldest daughters DS and it came out great.
Sent from my SM-N910R4 using proboards
|
|
|
|
Post by gotareef on Jan 28, 2015 15:59:46 GMT -5
with the iphone from what ive seen it isnt sealed on like android phones ive done that and it sux! using a heatgun then pealing it off carefully so you dont damage the seal....
|
|
|
|
Post by jess on Jan 28, 2015 16:31:56 GMT -5
I can fix but little far lol. I had screen to lol
Sent from my HTC6525LVW using proboards
|
|
|
|
Post by gotareef on Jan 29, 2015 10:30:19 GMT -5
|
|
|
|
Post by jess on Jan 30, 2015 9:52:03 GMT -5
Use a big piece of duct tape or magnet to place screws and parts on. Just imagine it as a phone and put the process were you took then from. There's lots of screws, some super tiny others longer. When taking battery cable off be careful, there's a small piece that sits on one of the screws that most people end up losing. The bigger screws on the side of the frame don't have to be removed, just loosened a bit, but the tiny screws in each corner have to come out. When putting the new screen on make sure both cables are gently pulled completely thru the frame. They have a tendency of getting pinched and then not reaching the board to connect. The cables are very thin and tear easy, be very careful handling them. Before putting new screen on take the tiny grill off the inside of the earpiece and put it on your new screen. They usually don't come with it. Don't forget your home button!!! Text me if you have issues. Don't check the board often.
Sent from my HTC6525LVW using proboards
|
|
|
|
Post by moulton712 on Jan 30, 2015 20:04:00 GMT -5
Rob, I've done a ton of iPhone 4s, when you get your screen in bring it over.
|
|
|
|
Post by gotareef on Jan 31, 2015 9:26:47 GMT -5
did it last night wasnt that bad at all.... thanks everyone!!
|
|
